[c-nsp] config smart serial port

[Hari bamsha Sapkota]

If you are talking about real scenario, you should connect it with V.35
cable...not an smart serial back-to-back cable.

Hope this helps!

On Tue, Oct 30, 2012 at 4:38 PM, s m <sam.gh1986 at gmail.com> wrote:

> hello guys,
> i have a 2800 router with a wic/2t smart serial module on it. i want to
> check these serial ports and learn how to config them. i googled so much
> and understand that smart serial ports should be connected to a modem or
> another smart serial port on another router (please let me know if i
> misunderstand). i don't have any modem or another router.
>
> is it possible to connect two ports of the same module together and config
> these serial ports? (something like loop back) and if it's possible how i
> can do it? (what commands are needed?). i just want to know how this serial
> port works and should be configured.
>
> thanks,
> sam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>