[c-nsp] How to see inactive configuration on ASR9K during card failure

[Keller Giacomarro]

Couldn't you do a "show startup-config"?  This is assuming that the config
was saved before the failure, of course.  If that also omits the down line
card, how about "more nvram:startup-config"?
On Sep 9, 2012 12:15 PM, "John Neiberger" <jneiberger at gmail.com> wrote:

> We had a linecard fail on an ASR9K and I wanted to verify what was
> connected to it. However, since the card was down, all configuration
> information was hidden. How do I see the interface configurations for
> a module that is not currently active? In other words, how do I see
> what config will be enabled once a new linecard is inserted?
>
> Thanks!
> John
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>