[c-nsp] How to see inactive configuration on ASR9K during card failure

[John Neiberger]

On Sun, Sep 9, 2012 at 3:36 PM, Gary Buhrmaster
<gary.buhrmaster at gmail.com> wrote:
> On Sun, Sep 9, 2012 at 5:08 PM, John Neiberger <jneiberger at gmail.com> wrote:
>> ... In other words, how do I see
>> what config will be enabled once a new linecard is inserted?
>
> Check your rancid (backup) configuration files?

Yes, that would easily work but I was curious to find a way to do it
from the router. There surely must be a way to see what configuration
will be applied when a new module is inserted, but even the TAC
engineer I was working with earlier didn't know how to do it.