[c-nsp] vpls - 3 sites - me3600 and 2 asr9k

[Aaron]

Everything seems to be ok.  The ce's are all 3750's.  One thing though, is
there a reason why ce 3750 which is off of pe1 (me3600) sees itself as a cdp
neighbor ?

 

All 3750's see the other 2 remote 3750's as cdp neighbors, except for ce off
of me3600 ALSO see itself.

 

Aaron

 

 

 

PE1 (me3600)

 

noc-3600#sh run | sec l2 vfi

l2 vfi tls-test manual

vpn id 1

neighbor 10.101.0.4 20000 encapsulation mpls

neighbor 10.101.0.3 20000 encapsulation mpls

 

noc-3600#sh run in vl 1000

interface Vlan1000

no ip address

xconnect vfi tls-test

 

noc-3600#sh run in g0/23

interface GigabitEthernet0/23

description c7 tls-test

switchport trunk allowed vlan none

switchport mode trunk

load-interval 30

service instance 1 ethernet

  encapsulation untagged , dot1q 1-4094

  l2protocol tunnel

  bridge-domain 1000

 

 

PE2 (asr9k)

 

RP/0/RSP0/CPU0:1-9k#sh run l2vpn br gr tls-test

l2vpn

bridge group tls-test

  bridge-domain tls-test

   interface GigabitEthernet0/0/0/9.116

   neighbor 10.101.0.4 pw-id 20000

   neighbor 10.101.12.253 pw-id 20000

 

RP/0/RSP0/CPU0:1-9k#sh run in g0/0/0/9

interface GigabitEthernet0/0/0/9

description tls-test

 

RP/0/RSP0/CPU0:1-9k#sh run in g0/0/0/9.116

interface GigabitEthernet0/0/0/9.116 l2transport

description c7 tls-test

encapsulation dot1q 1-4094 , untagged

l2protocol cpsv tunnel

 

PE3 (asr9k)

RP/0/RSP0/CPU0:2-9k#sh run l2vpn br gr tls-test

l2vpn

bridge group tls-test

  bridge-domain tls-test

   interface GigabitEthernet0/1/0/15.116

   neighbor 10.101.0.3 pw-id 20000

   neighbor 10.101.12.253 pw-id 20000

 

RP/0/RSP0/CPU0:2-9k#sh run in g0/1/0/15

interface GigabitEthernet0/1/0/15

description tls-test to training room 3750 smvy hq bldg

negotiation auto

 

RP/0/RSP0/CPU0:2-9k#sh run in g0/1/0/15.116

interface GigabitEthernet0/1/0/15.116 l2transport

description c7 tls-test

encapsulation dot1q 1-4094 , untagged

l2protocol cpsv tunnel