[c-nsp] 2900 -> 2960 config question

[Gert Doering]

Hi,

On Fri, Sep 21, 2012 at 10:48:29AM -0400, Joseph Mays wrote:
> I don't know what might be causing this, unless something about the vlan database is not created by cutting and pasting the config from the 2900XL to the 2960.

Most likely exactly this: the vlan 202 is not existing, since the
vlan database doesn't show up in "show run".

(Stupid move.  Even more stupid, still the same with vtp v3, where even
*more* config doesn't show up in "show run".  Someone never had to 
replace a switch in the middle of the night, relying on a saved copy
of "startup-config" to contain all you need to recover...).

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20120921/639b96b3/attachment.sig>