[c-nsp] ME3600X Local Connect

[Ivan]

I am running

Switch#show license
Index 1 Feature: AdvancedMetroIPAccess
         Period left: Life time
         License Type: Permanent
         License State: Active, In Use
         License Count: Non-Counted
         License Priority: Medium
Index 2 Feature: MetroIPAccess
Index 3 Feature: 10GEUpgrade
         Period left: Life time
         License Type: Permanent
         License State: Active, In Use
         License Count: Non-Counted
         License Priority: Medium

What do you get after putting in a name for the connect - all I get is 
Dialer as an option.

Switch(config)#connect FOO ?
   Dialer  Dialer interface

On 28/Sep/2012 12:22 a.m., Andrew K. wrote:
> Are you running the advanced services license?
>
> me360x-universalk9-mz.152-2.S1.bin
>
> switch#sh license
> Index 1 Feature: AdvancedMetroIPAccess
>          Period left: Life time
> switch(config)#connect ?
>    WORD  Name for this connection
>
>
>
> On 9/27/2012 6:38 AM, Nick Hilliard wrote:
>> On 27/09/2012 03:38, Ivan wrote:
>>> Just connecting 2 service instances is all I would like to do.
>> There is a difference between an ESI and an xconnect.  In the case of an
>> ESI, the switch will learn all the mac addresses passing over the link.
>> This doesn't happen for an xconnect.
>>
>> If you're dealing with a small number of mac addresses, this probably
>> isn't
>> a problem.  If you're dealing with a lot, then it may be...
>>
>> Nick
>>
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/