[c-nsp] RAD's MiTOP-E3/T3 SFP to ME3600x(-cx) ???

[Tim Jackson]

Chances are it'll work, but when we asked Cisco about this (they re-sell
this for a few situations) they said it had not been tested/approved for
the ME3600X.. I can't remember the platform that it was "approved" for by
them.

The SFPs work "ok" for Pseudowire..




On Wed, Apr 3, 2013 at 8:08 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk>wrote:

> Hi Folks,
> Just found this and I'm confused by the data sheet. It says it can be used
> with any SFP port. That would be awesome.
> I could understand it only provides structure agnostic service - so
> whatever
> enters my port it gets converted to Ethernet and I can bridge the port over
> to a p2p PW - and vice versa on egress.
> But how the heck I get the clocking right?
> Has anyone tried it please?
> I don't even know what MiTOP means :) I only guess the OP at the end means
> over packet.
>
> adam
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>