[c-nsp] ME3600X rewrite push problem
Claes Jansson
claes at gastabud.com
Mon Apr 8 16:41:12 EDT 2013
Thanks for pointing that out. It was a copy-paste error on my behalf.
The actual config on BE1.333 matches on 2001+101. And trying to
configure the same matching criteria on two interfaces is rejected by
the router.
//Claes
On 2013-04-08 16:14, Jason Lixfeld wrote:
> Hi,
>
> Sorry for hijacking, but I have a completely unrelated question after looking at your config:
>
> On 2013-04-08, at 5:15 AM, Claes Jansson <claes at gastabud.com> wrote:
>
>> !
>> interface Bundle-Ether1.333
>> vrf test1
>> ipv4 address 3.3.3.3 255.255.255.0
>> encapsulation dot1q 2001 second-dot1q 102
>> !
>> interface Bundle-Ether1.444
>> encapsulation dot1q 2001 second-dot1q 102
>> rewrite ingress tag pop 2 sym
>> !
> You are matching the same inner and outer tags twice. I'm confused because I don't understand under what circumstances frames would be matched by Be1.444 when the frames are already matched and forwarded by Be1.333.
>
>
>
More information about the cisco-nsp
mailing list