[c-nsp] Way to get 3rd party optics to work in UCS/FEX?

[David Hubbard]

Ah, that got me close but unfortunately the command
isn't there:

fab1-A(nxos)# service unsupported-transceiver
                       ^
% Invalid command at '^' marker.

Maybe it would show up if I upgrade?  It's been
about a year; currently running 2.02q:

5.0(3)N2(2.02q) 

David

> -----Original Message-----
> From: Ryan West [mailto:rwest at zyedge.com] 
> Sent: Friday, April 12, 2013 8:02 AM
> To: Joachim Tingvold
> Cc: David Hubbard; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Way to get 3rd party optics to work in UCS/FEX?
> 
> Not entirely sure it will work, but you can enter those 
> commands on either FI by opening ssh to the shared address of 
> UCSM and typing connect nx a or connect nx b to get to the 
> CLI of either FI. 
> 
> Sent from handheld. 
> 
> On Apr 12, 2013, at 1:59 AM, "Joachim Tingvold" 
> <joachim at tingvold.com> wrote:
> 
> > On 12. apr. 2013, at 07:53, Joachim Tingvold 
> <joachim at tingvold.com> wrote:
> >>> Any undocumented command to get them to work?
> >> service unsupported-transceiver?
> > 
> > Maybe throw in this one as well;
> > 
> > no errdisable detect cause gbic-invalid
> > 
> > -- 
> > Joachim
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>