[c-nsp] VPLS IOS IOS-XR
Aaron
aaron1 at gvtc.com
Tue Apr 16 10:35:15 EDT 2013
Trying to hide configs, I probably shouldn't have change this in my previous
email regarding me3600 ios...
router bgp 123
should be...
router bgp 64512
Aaron
-----Original Message-----
From: Aaron [mailto:aaron1 at gvtc.com]
Sent: Tuesday, April 16, 2013 9:33 AM
To: 'Mohammad Khalil'; 'Blake Dunlap'
Cc: 'cisco-nsp at puck.nether.net'
Subject: RE: [c-nsp] VPLS IOS IOS-XR
This is for VPLS w/BGP AD w/LDP Sig.... ME3600 and ASR9006...
Aaron
-------------- IOS (ME3600 I don't recall if it was 15.2 or 15.3)
interface GigabitEthernet0/2
switchport trunk allowed vlan none
switchport mode trunk
service instance 1 ethernet
encapsulation (whatever you wanna do)
bridge-domain 100
interface Vlan100
no ip address
xconnect vfi vpls1
l2 vfi vpls1 autodiscovery
vpn id 100
router bgp 123
bgp router-id 1.1.1.1
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor 1.1.1.2 remote-as 64512
neighbor 1.1.1.2 update-source Loopback0
address-family l2vpn vpls
neighbor 1.1.1.2 activate
neighbor 1.1.1.2 prefix-length-size 2
***** I recall that the l2 vfi has some automatic route target
imports/exports and some automatic rd behavior, perhaps taken from the bgp
AS number and VPN ID...
***** I think I found that without this in IOS "neighbor 1.1.1.2
prefix-length-size 2" you have issues with bgp session towards ios xr box...
RP/0/RSP0/CPU0:9k#sh bgp l2 vpls neighbors 1.1.1.1 | be mal Mon Jan 7
15:54:00.672 CST Total malformed UPDATE 1206
Last malformed UPDATE 00:00:03
Error subcode 10, attribute code 0, action reset session
Malformed UPDATE: 88 bytes
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
(much more hex code here, intentionally removed)
-------------- IOS XR (ASR9006 4.1.2)
interface GigabitEthernet0/0/0/10.1 l2transport encapsulation (whatever you
want)
l2vpn
bridge group gr1
bridge-domain bd1
interface GigabitEthernet0/0/0/10.1
!
vfi vf1
vpn-id 100
autodiscovery bgp
rd auto
route-target 64512:100
signaling-protocol ldp
router bgp 64512
bgp router-id 1.1.1.2
address-family l2vpn vpls-vpws
!
neighbor 1.1.1.1
remote-as 64512
update-source Loopback0
address-family l2vpn vpls-vpws
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Mohammad Khalil
Sent: Tuesday, April 16, 2013 1:44 AM
To: Blake Dunlap
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] VPLS IOS IOS-XR
Can you please share your experience ?
Thanks
From: ikiris at gmail.com
Date: Mon, 15 Apr 2013 19:37:25 -0500
Subject: Re: [c-nsp] VPLS IOS IOS-XR
To: eng_mssk at hotmail.com
CC: cisco-nsp at puck.nether.net
Yes.
-Blake
On Mon, Apr 15, 2013 at 7:04 PM, Mohammad Khalil <eng_mssk at hotmail.com>
wrote:
Hi
Have anyone tried VPLS between IOS and IOS-XR?
Thanks
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list