[c-nsp] IPv6 Transition - IP/MPLS Backbone

Mattias Gyllenvarg Mattias.Gyllenvarg at Bredband2.se
Wed Apr 17 03:24:16 EDT 2013

Beware of one thing 6PE can not do.

BGPv6 over multi-hop will not work as there is no recursive lookup from v6
too v4 in your BGP speaker.
This is a feature, not a bug... so it will not be fixed.

Otherwise 6PE is a breeze.

On 14 April 2013 21:56, Ahmed Hilmy <hilmy.aa at gmail.com> wrote:

> Hello Expert,
> We are planning to deploy IPv6 at our IPv4 Backbone, our PE to as Dual
> Stack and carry IPv6 packet through MPLS label.
> There are different scenarios, one of them is 6PE.
> Would you please guide me from where can i start ?
> Thanks,
> Ahmed
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

*Med Vänliga Hälsningar - Best Regards*

*Mattias Gyllenvarg*

Tel: +46 406219712

More information about the cisco-nsp mailing list