[c-nsp] ASR9k to Me3600x VPLS
Waris Sagheer (waris)
waris at cisco.com
Mon Apr 22 18:00:00 EDT 2013
Hi Adam,
15.2(4)S3 would be the recommended release. However 3x10gig on ME3600X-24CX will be supported in 15.3(1)S release.15.3(1)S2 would also be a good candidate.
Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]
Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389
CCIE - 19901
<http://www.cisco.com/>
[Think before you print.] Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
From: adam vitkovsky <adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk>>
Date: Monday, April 22, 2013 4:56 AM
To: Waris Sagheer <waris at cisco.com<mailto:waris at cisco.com>>, Pshem Kowalczyk <pshem.k at gmail.com<mailto:pshem.k at gmail.com>>
Cc: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: RE: [c-nsp] ASR9k to Me3600x VPLS
Hi Waris,
So is the 15.2(4)S3 a best stable one please?
Also would it have the knob to only enable 3x10GigE with the license for 2
additional 10GigE interfaces -or that one is only supported in 15.3 please?
Thank you very much
adam
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Waris Sagheer (waris)
Sent: Sunday, April 21, 2013 2:47 AM
To: Waris Sagheer (waris); Pshem Kowalczyk
Cc: cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] ASR9k to Me3600x VPLS
Team,
The issue is resolved and the fix will be available in the following
releases
-15.3(2)S/XE3.9.0S has this fix integrated and available to customers.
-Fix integrated in both 15.2(4)S3/XE3.7.3S and 15.3(1)S2/XE3.8.2S and will
release them to CCO on 4/23 and 4/30 respectively.
Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]
Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389
CCIE - 19901
<http://www.cisco.com/>
[Think before you print.] Think before you print.
This email may contain confidential and privileged material for the sole use
of the intended recipient. Any review, use, distribution or disclosure by
others is strictly prohibited. If you are not the intended recipient (or
authorized to receive for the recipient), please contact the sender by reply
email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
From: Waris Sagheer <waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com>>
Date: Sunday, March 10, 2013 9:19 PM
To: Pshem Kowalczyk <pshem.k at gmail.com<mailto:pshem.k at gmail.com><mailto:pshem.k at gmail.com>>
Cc: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net>"
<cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net>>
Subject: Re: [c-nsp] ASR9k to Me3600x VPLS
Pshem,
I need to check with the team.
Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]
Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com><mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389
CCIE - 19901
<http://www.cisco.com/>
[Think before you print.] Think before you print.
This email may contain confidential and privileged material for the sole use
of the intended recipient. Any review, use, distribution or disclosure by
others is strictly prohibited. If you are not the intended recipient (or
authorized to receive for the recipient), please contact the sender by reply
email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
From: Pshem Kowalczyk
<pshem.k at gmail.com<mailto:pshem.k at gmail.com><mailto:pshem.k at gmail.com><mailto:pshem.k at gmail.com>>
Date: Sunday, March 10, 2013 4:56 PM
To: Waris Sagheer
<waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com><mailto:waris at cisco.com>>
Cc: adam vitkovsky
<adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky
@swan.sk>>,
"cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-ns
p at puck.nether.net<mailto:p at puck.nether.net>>"
<cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-ns
p at puck.nether.net<mailto:p at puck.nether.net>>>
Subject: Re: [c-nsp] ASR9k to Me3600x VPLS
Hi,
Thank you Waris for confirming my suspicions. We can't flap the interface as
we have 50+ customers on it (all others are p2p vc). We've tried removing
the vfi and re-adding it, but no avail.
Is there any workaround available?
kind regards
Pshem
On 11 March 2013 13:05, Waris Sagheer (waris)
<waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com><mailto:waris at cisco.com>> wrote:
Hi Pashem,
You are right there is an issue with the control word between the two
platforms and this issue is in the process of getting fixed. I'll get back
to you with the date of fixed image. BTW can you try to flap the interface?
Best Regards,
[X]
Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com><mailto:waris at cisco.com><mailto:waris at cisco.com>
Phone: +1 408 853 6682<tel:%2B1%20408%20853%206682>
Mobile: +1 408 835 1389<tel:%2B1%20408%20835%201389>
CCIE - 19901
<http://www.cisco.com/>
[Think before you print.] Think before you print.
This email may contain confidential and privileged material for the sole use
of the intended recipient. Any review, use, distribution or disclosure by
others is strictly prohibited. If you are not the intended recipient (or
authorized to receive for the recipient), please contact the sender by reply
email and delete all copies of this message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
From: Pshem Kowalczyk
<pshem.k at gmail.com<mailto:pshem.k at gmail.com><mailto:pshem.k at gmail.com><mailto:pshem.k at gmail.com>>
Date: Sunday, March 10, 2013 2:12 PM
To: adam vitkovsky
<adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky
@swan.sk>>
Cc:
"cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-ns
p at puck.nether.net<mailto:p at puck.nether.net>>"
<cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-ns
p at puck.nether.net<mailto:p at puck.nether.net>>>
Subject: Re: [c-nsp] ASR9k to Me3600x VPLS
Hi,
The discovery works fine - we have the prefix length specified on the
Me3600x, both devices know that they have to build the LSP it's just
not coming up and I think it's not coming up because the control word
can not be negotiated properly.
kind regards
Pshem
On 11 March 2013 10:38, Adam Vitkovsky
<adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky at swan.sk><mailto:adam.vitkovsky
@swan.sk>> wrote:
Hi Pshem,
Isn't the "prefix-length-size 2" the problem?
>From Cisco web page:
Interoperability Between Cisco IOS XR and Cisco IOS on VPLS LDP Signaling
The Cisco IOS Software encodes the NLRI length in the fist byte in bits
format in the BGP Update message. However, the Cisco IOS XR Software
interprets the NLRI length in 2 bytes. Therefore, when the BGP neighbor with
VPLS-VPWS address family is configured between the IOS and the IOS XR, NLRI
mismatch can happen, leading to flapping between neighbors. To avoid this
conflict, IOS supports prefix-length-size 2 command that needs to be enabled
for IOS to work with IOS XR. When the prefix-length-size 2 command is
configured in IOS, the NLRI length is encoded in bytes. This configuration
is mandatory for IOS to work with IOS XR.
This is a sample IOS configuration with the prefix-length-size 2 command:
router bgp 1
address-family l2vpn vpls
neighbor 5.5.5.2 activate
neighbor 5.5.5.2 prefix-length-size 2 --------> NLRI length = 2 bytes
exit-address-family
adam
-----Original Message-----
From:
cisco-nsp-bounces at puck.nether.net<mailto:cisco-nsp-bounces at puck.nether.net><mailto:cisco-nsp-bounces at puck.nether.net><
mailto:cisco-nsp-bounces at puck.nether.net>
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Pshem Kowalczyk
Sent: Sunday, March 10, 2013 10:03 PM
To:
cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp
@puck.nether.net>
Subject: [c-nsp] ASR9k to Me3600x VPLS
Hi,
I hope that collective knowledge can help me here.
We're trying to build a simple VPLS between an ASR9k (IOS XR 4.2.3) and
ME3600x (IOS 15.3(1)S) using BGP autodiscovery and LDP for signaling.
THe VPLS is not coming up,as the pseudowires are not up, I've located the
issue to the control word - the 9k runs with 'disabled' whilst the ME3600x
runs on autosense and that is failing as it results on 'control word on':
ME3600X:
Local interface: VFI VFI-1-20H731 vfi up
Interworking type is Ethernet
Destination address: 10.123.110.1, VC ID: 2105, VC status: down
Last error: Local peer access circuit is down
Output interface: none, imposed label stack {}
Preferred path: not configured
Default path: no route
No adjacency
Create time: 16:02:58, last status change time: 12w2d
Last label FSM state change time: 16:02:58
Signaling protocol: LDP, peer 10.123.110.1:0<http://10.123.110.1:0> up
Targeted Hello: 10.123.143.1(LDP Id) -> 10.123.110.1, LDP is DOWN, no
binding
Status TLV support (local/remote) : enabled/None (no remote binding)
LDP route watch : enabled
Label/status state machine : local ready, LruRnd
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: No fault
Last local AC circuit status sent: Not sent
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: No fault
Last remote LDP TLV status rcvd: None (no remote binding)
Last remote LDP ADJ status rcvd: None (no remote binding)
MPLS VC labels: local 212, remote unassigned
AGI: type 1, len 8, 000A 4454 0000 0839
Local AII: type 1, len 4, 0A7B 8F01 (10.123.143.1)
Remote AII: type 1, len 4, 0A7B 6E01 (10.123.110.1)
Group ID: local n/a, remote unknown
MTU: local 9000, remote unknown
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense) <=========================
Dataplane:
SSM segment/switch IDs: 0/0 (used), PWID: 31
VC statistics:
transit packet totals: receive 0, send 0
transit byte totals: receive 0, send 0
ASR9k:
(sh l2vpn bridge-domain)
List of VFIs:
VFI VFI-1-20H731 (up)
VPN-ID: 2105, Auto Discovery: BGP, state is Provisioned (Service
Connected)
Route Distinguisher: 17492:10012105
Import Route Targets:
17492:2105
Export Route Targets:
17492:2105
Signaling protocol: LDP
AS Number: 17492
VPLS-ID: 17492:2105
L2VPN Router ID: 10.123.110.1
PW: neighbor 10.123.143.1, PW ID 17492:2105, state is down ( all
ready
) (Segment-down)
PW class not set, XC ID 0xc000001e
Encapsulation MPLS, Auto-discovered (BGP), protocol LDP
Source address 10.123.110.1
PW type Ethernet, control word disabled, interworking none
PW backup disable delay 0 sec
Sequencing not set
PW Status TLV in use
MPLS Local Remote
------------ ------------------------------
-------------------------
Label 16015 212
BGP Peer ID 10.123.110.1 10.123.143.1
LDP ID 10.123.110.1 10.123.143.1
AII 10.123.110.1 10.123.143.1
AGI 17492:2105 17492:2105
Group ID 0x5 0x0
Interface VFI-1-20H731 unknown
MTU 9000 9000
Control word disabled enabled
PW type Ethernet Ethernet
VCCV CV type 0x2 0x12
(LSP ping verification) (LSP ping
verification)
VCCV CC type 0x6 0x3
(control word)
(router alert label) (router alert label)
(TTL expiry)
------------ ------------------------------
-------------------------
Incoming Status (PW Status TLV):
Status code: 0x0 (Up) in Notification message
MIB cpwVcIndex: 3221225502
Create time: 07/03/2013 17:19:14 (16:04:16 ago)
Last time status changed: 07/03/2013 17:19:30 (16:03:59 ago)
MAC withdraw message: send 0 receive 0
Error: illegal control word <======================
Static MAC addresses:
DHCPv4 snooping: disabled
IGMP Snooping profile: none
VFI Statistics:
drops: illegal VLAN 0, illegal length 0
Does anyone have it going between the 9k and ME3600x?
kind regards
Pshem
_______________________________________________
cisco-nsp mailing list
cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp
@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list
cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp
@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list
cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net><mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list