[c-nsp] Sup2T rate limit

[Luan Nguyen]

Hi Mack,

Thanks for the suggestion. It's the VLAN for the ACE module - so nowhere to
put that command.

Regards,

-Luan


On Mon, Apr 22, 2013 at 12:47 PM, Mack McBride <mack.mcbride at viawest.com>wrote:

> Did you use the 'mls qos vlan-based' command?
>
> Mack
>
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Luan Nguyen
> Sent: Sunday, April 21, 2013 10:04 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Sup2T rate limit
>
> Hi folks,
>
> From what I've been reading, I could do the following to rate limit a vlan
> to 100M
>
> class-map match-all rate match any policy-map rate class rate police
> 100000000 3200 conform transmit exceed drop int vlan99 service-policy
> input rate
>
> But show policy-map interface vlan99 detail doesn't show any statistic and
> show int vlan99 always has ~500M input which I want to police to 100M.
>
> It's running:"s2t54-ipservicesk9-mz.SPA.150-1.SY1.bin"
>
> Thanks!
>
> -lmn
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>