[c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis blind

[Waris Sagheer (waris)]

Hi Adam,
Did the knob fixed the issue?

Best Regards,

[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]

Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901


<http://www.cisco.com/>



[Think before you print.] Think before you print.

This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html



From: adam vitkovsky <adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk>>
Date: Thursday, April 25, 2013 7:07 AM
To: Pete Lumbis <alumbis at gmail.com<mailto:alumbis at gmail.com>>
Cc: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: Re: [c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis blind

Aah yes your right I totally forgot about that.


adam

From: Pete Lumbis [mailto:alumbis at gmail.com]
Sent: Thursday, April 25, 2013 3:48 PM
To: Adam Vitkovsky
Cc: cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis
blind


With regards to the IIH padding, disabling padding only disables the padding
after a neighbor is discovered. You need to tack on the "always" keyword to
disable all padding. This may be hidden as it was only recently exposed (but
it's been there for a long time).




On Thu, Apr 25, 2013 at 6:01 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk<mailto:adam.vitkovsky at swan.sk>>
wrote:

Hi folks,
I got unidirectional link for CLNS on a routed port-channel between
me3600x-cx and ASR9k. There's only one GigE in the bundle on both ends.
ASR9k sees IIHs in and out however on CX I do not see IIHs from ASR9k.
Also I have noticed that CX pads the IIH to the full MTU even though the
interface is configured as p2p and I have hello padding disabled for p2p
interfaces.

I have the same setup towards me3600x with no issues (well BFD is not
functional)
Everything runs smooth on physical interfaces, CX also disables IIH padding

CX is 15.2(4)S2
X is 15.3(1)S

I guess I have to try with 15.2(4)S3 on CX


adam

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/