[c-nsp] 15.1SY & draft-rosen MVPN

Tim Durack tdurack at gmail.com
Sat Apr 27 18:05:26 EDT 2013

On Thu, Jan 3, 2013 at 9:50 AM, Phil Mayers <p.mayers at imperial.ac.uk> wrote:

> On 06/12/12 10:13, Phil Mayers wrote:
>> On 11/19/2012 11:20 PM, Arie Vayner (avayner) wrote:
>>> The command should be under the IPv4 address family...
>>> Router(config)#vrf definition test
>> Hmm. TAC have been looking at this for me, and apparently the feature is
>> not present in the "Advanced IP services" image. It is present in the
>> "Advanced enterprise" image (which we're not licensed for).
>> Did I miss some feature move / relicense stuff for 15.1(SY)? I know the
>> "WAN" bit of the images has gone - maybe related?
> All,
> Just to follow up, this seems to be a defect - the feature seems to have
> fallen out of the "advanced IP services" image somehow, but is supposedly
> present in "advanced enterprise". Cisco haven't confirmed I'm "authorised"
> to run that image temporarily, so I haven't tested this...
> See CSCud67557
> ______________________________**_________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
> archive at http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>

Did you end up running adv ent as a workaround? We have just run into this
same issue.

(I wonder if Cisco still tests code, or just waits for customers to open
trouble tickets. Regardless, this is another nail in the multicast coffin.)


More information about the cisco-nsp mailing list