[c-nsp] EEM for BGP

[Fredrik Vöcks]

Hi,

Or you use a tool like observium http://www.observium.org/wiki/Main_Page which
can display this data for your operations personal.

Regards,


Fredrik Vöcks
Senior IP Network Engineer



On 5 August 2013 10:20, amir agha <monitor64 at yahoo.com> wrote:

> Hi list,
> Is that possible to write an Embedded Event Management System to achive
> the following in following scenario of BGP environment?
>
> There are very many BGP peerings in the network, and many events. The
> reason may be that customers turn off the power at the CPE, etc.
> We believe that it would be too extensive to examine all these events.
> Is it possible to achieve the following:
> The script performs the show command as shown below. If there is anything
> on the active or idle sent an email to "support office".
>
> Router# sh ip bgp summary | include Active|Idle
> 81.175.31.78    4      65500 3215550 3079173        0    0    0 1w1d
> Active
> 81.175.31.174   4      65500       0       0        0    0    0 never
>  Active
> 213.160.232.170 4      64519       0       0        0    0    0 never
>  Idle
>
> Is this possible to achieve?
>
> Amir
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>