[c-nsp] EEM for BGP

[Mark Tees]

Zabbix discovery templates and the BGP4 mib will achieve exactly what you want. Or if you have an existing monitoring system that supports SNMP polling the BGP mib will give you the data.

Sent from some sort of iDevice.

On 05/08/2013, at 6:20 PM, amir agha <monitor64 at yahoo.com> wrote:

> Hi list,
> Is that possible to write an Embedded Event Management System to achive the following in following scenario of BGP environment?
>  
> There are very many BGP peerings in the network, and many events. The reason may be that customers turn off the power at the CPE, etc.
> We believe that it would be too extensive to examine all these events.
> Is it possible to achieve the following:
> The script performs the show command as shown below. If there is anything on the active or idle sent an email to "support office".
> 
> Router# sh ip bgp summary | include Active|Idle
> 81.175.31.78    4      65500 3215550 3079173        0    0    0 1w1d     Active
> 81.175.31.174   4      65500       0       0        0    0    0 never    Active
> 213.160.232.170 4      64519       0       0        0    0    0 never    Idle
>  
> Is this possible to achieve?
>  
> Amir
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/