[c-nsp] Router rebooting due to software crash.

[Gert Doering]

Hi,

On Mon, Aug 05, 2013 at 02:43:19PM -0400, Joseph Mays wrote:
> We have a cisco 3600 that has rebooted twice in the last two hours, both times due to a software crash that shows the same memory address. I checked "show mem" and nothing is listed as operating that address, at least not right now. This router has been in operation a long time and has not had these problems previously. Nothing has changed in the config on the router in the last several months, at least.

3600s are prone to "re-seat everything, problem gone" issues, so if it 
happens again, I'd re-seat all NMs (power off the 3640 first) and make
sure all are solidly seated and properly fastened.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20130805/9c48d272/attachment.sig>