[c-nsp] ME3600 QoS

[Darren O'Connor]

On that same vein of port channels. This morning my LACP ports bounced between my me3600x test box and a Brocade XMR and for some odd reason it caused my LSP tunnel interfaces to push the CPU up to 99% for a few hours. Makes me weary about using a PO at all on this box

> From: adam.vitkovsky at swan.sk
> To: nick at fluency.net.uk; cisco-nsp at puck.nether.net
> Date: Wed, 7 Aug 2013 14:52:17 +0200
> Subject: Re: [c-nsp] ME3600 QoS
> 
> > Can be applied to the member ports of the channel.  
> > Also you can't apply service policies to EFP's on a port channel either.  
> 
> Thus my conclusion that port-channel interfaces on ME3600 are useless so far
> No incoming multicast
> No BFD with ASR9k
> No QOS
> 
> Though I'm not sure whether some of this has been fixed in the most recent
> codes for X and CX
> 
> adam
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/