[c-nsp] Nexu 5020 HSRP issues

[Chuck Church]

Any control plane policing in action?  If Nexus support it, I'm not sure...

Chuck

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Christian Kildau
Sent: Friday, August 09, 2013 9:33 AM
To: Rati Berikaant Jokhadze
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Nexu 5020 HSRP issues

sw2# sh run int vlan200

!Command: show running-config interface Vlan200
!Time: Fri Aug  9 13:32:04 2013

version 5.2(1)N1(5)

interface Vlan200
  no shutdown
  description vlan fuer HNAS 10.8.200.0/24 - HSRP 10.8.200.1
  no ip redirects
  ip address 10.8.200.3/24
  hsrp version 2
  hsrp 1
    preempt
    ip 10.8.200.1

sw1# ping 10.8.200.3
PING 10.8.200.3 (10.8.200.3): 56 data bytes
64 bytes from 10.8.200.3: icmp_seq=0 ttl=254 time=2.524 ms
64 bytes from 10.8.200.3: icmp_seq=1 ttl=254 time=0.954 ms
64 bytes from 10.8.200.3: icmp_seq=2 ttl=254 time=0.854 ms
64 bytes from 10.8.200.3: icmp_seq=3 ttl=254 time=1.138 ms
64 bytes from 10.8.200.3: icmp_seq=4 ttl=254 time=0.875 ms

--- 10.8.200.3 ping statistics ---
5 packets transmitted, 5 packets received, 0.00% packet loss round-trip
min/avg/max = 0.854/1.268/2.524 ms




Am 09.08.2013 um 14:30 schrieb Rati Berikaant Jokhadze:

> Hi ,
> 
> Please share us SW2 int vlan200 config.
> 
> and ping result from sw1 to sw2
> 
> On 08/09/2013 03:52 PM, Christian Kildau wrote:
>> Hi Cisco-NSP,
>> 
>> we're having some very strange issues while adding HSRP to our Nexus 5020
where both HSRP peers are up, but don't recognize each other, thus causing
some issues.
>> 
>> Our config is pretty simple, running 4 VLANs and VPC. VPC is up and the
Trunks are running fine.
>> 
>> We now added some SVIs for L3 routing which also seems to be working
fine.
>> But as soon as we add HSRP config as follows:
>> 
>> interface Vlan200
>>   no shutdown
>>   no ip redirects
>>   ip address 10.8.200.2/24
>>   hsrp version 2
>>   hsrp 1
>>     preempt
>>     priority 110
>>     ip 10.8.200.1
>> 
>> we're facing some very strange issues.
>> According to 'debug hsrp engine packet hello' both sides do send HSRP
Hello Packets, but the other end never receives them, so both peers are in
Active state:
>> 
>> sw1# sh hsrp group 1 brief
>> Interface   Grp Prio P State    Active addr      Standby addr     Group
addr
>> Vlan200     1   110  P Active   local            unknown
10.8.200.1
>>   (conf)
>> sw2# sh hsrp group 1 brief
>> Interface   Grp Prio P State    Active addr      Standby addr     Group
addr
>> Vlan200     1   100  P Active   local            unknown
10.8.200.1
>>   (conf)
>> 
>> What could cause this?
>> 
>> Thanks for any hint!
>> 
>> Kind Regards
>> Christian
>> 
>> P.S.
>> features are enabled of course ;-)
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/