[c-nsp] Resetting (or not) a 6500/sup720 from the console/rommon

[Joe Maimon]

Lamar Owen wrote:
> On 07/30/2013 08:23 AM, Joe Maimon wrote:
>> All,
>>
>> Having a similar situation here. Hoping to get more feedback then Phil
>> ever did.
>>
>> Is there a way through console only to worm back into the
>> SP/rommon/reset?
>>
>> I can boot an old msfc image on the RP (hybrid mode with both SP and
>> RP running IOS), but havent figured out anything further yet.
>>
>> The questions comes down to whether remote console is sufficient or if
>> remote power is also required.
> Hmm, the only thing I could find is to press ctrl-C three times in a row
> at the RP rommon prompt (
> http://wiki.nesevo.com/index.php/Conversion_on_Supervisor_Engine_720 at
> step 8; confirmed at the same step on
> http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_720).
> It would be interesting if that worked for you.
>


It did not.