[c-nsp] OSPF Conditional Inject

[M K]

Hi Oliver :)My config is so simpleR1 - R2 - R3
R2 is configured with a static route pointing to R1 (external network)ip route 0.0.0.0 0.0.0.0 192.168.12.1I configured an access-list matches the link between R1 and R2R2access-list 1 permit 192.168.12.0 0.0.0.255route-map MAP permit 10match ip address 1
router ospf 
default-information originate always route-map MAP
Now , when I turn off the interface from R1 side , R3 no longer receives the default route when I used a serial connectionWhen I used Ethernet , the default route still appears on R3 routing table
I can use another way such as EEM but I want to understand this behavior
BR,
> From: oboehmer at cisco.com
> To: gunner_200 at live.com; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] OSPF Conditional Inject
> Date: Tue, 3 Dec 2013 06:36:39 +0000
> 
> 
> 
> >Hi I was working on a setup to test the OSPF conditional injection of a
> >default routeIt worked me fine for Serial connection , but for Ethernet
> >media it did not why ? 		 	   		
> 
> because you didn't share the config? ;-)
> 
> 	oli
>