[c-nsp] Cisco ME3800 and QinQ

[Eric Van Tol]

Me3600/ME3800 use EVCs for q-in-q configuration:

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_3_S/configuration/guide/swevc.html#wp1043415

> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Olivier CALVANO
> Sent: Tuesday, December 17, 2013 8:06 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco ME3800 and QinQ
> 
> Hi
> 
> i want use a Cisco 3800 for change a old cisco 3750 but i have a
> problems:
> 
> ME3800(config-if)#switchport mod
> ME3800(config-if)#switchport mode ?
>   access  Set trunking mode to ACCESS unconditionally
>   trunk   Set trunking mode to TRUNK unconditionally
> 
> i don't have the dot1q-tunnel , anyone know why ?
> 
> sh ver:
> 
> *Dec 17 12:39:16.043: %SYS-5-CONFIG_I: Configured from console by
> consoler
> Cisco IOS Software, ME380x Software (ME380x-UNIVERSALK9-M), Version
> 15.2(4)S4, RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2013 by Cisco Systems, Inc.
> Compiled Sun 01-Sep-13 18:29 by prod_rel_team
> 
> ROM: Bootstrap program is WHALES boot loader
> BOOTLDR: ME380x Boot Loader (ME380X-HBOOT-M) Version 12.2(52r)EY2,
> RELEASE
> SOFTWARE (fc1)
> 
> ME3800-1 uptime is 23 minutes
> System returned to ROM by power-on
> System image file is
> "flash:/me380x-universalk9-mz.152-4.S4/me380x-universalk9-mz.152-
> 4.S4.bin"
> Last reload reason: Unknown reason
> 
> 
> 
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
> 
> A summary of U.S. laws governing Cisco cryptographic products may be
> found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> 
> If you require further assistance please contact us by sending email to
> export at cisco.com.
> 
> License Level: MetroEthServices
> License Type: Permanent
> Next reload license Level: MetroEthServices
> 
> cisco ME-3800X-24FS-M (PowerPC8572) processor (revision A0) with
> 1015808K/32760K bytes of memory.
> Processor board ID FOC1545V26H
> Last reset from power-on
> 1 Virtual Ethernet interface
> 25 Gigabit Ethernet interfaces
> 2 Ten Gigabit Ethernet interfaces
> The password-recovery mechanism is enabled.
> 
> 1536K bytes of flash-simulated non-volatile configuration memory.
> Base ethernet MAC Address       : D4:D7:48:BC:43:80
> Motherboard assembly number     : 73-12068-07
> Motherboard serial number       : FOC154050PU
> Model revision number           : A0
> Motherboard revision number     : B0
> Model number                    : ME-3800X-24FS-M
> System serial number            : FOC1545V26H
> Top Assembly Part Number        : 800-31465-01
> Top Assembly Revision Number    : B0
> Version ID                      : V01
> CLEI Code Number                : IPMSW00DRA
> 
> Configuration register is 0xF
> 
> 
> thanks for your help
> best regard
> jerome
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/