[c-nsp] EIGRP Load Balance

[Childs, Aaron]

You could use offset-list in your router eigrp config.

Aaron

Aaron Childs, CCNA
Associate Director, Networking
Information Technology
www.westfield.ma.edu/it 
Please Note: new e-mail address - aaron at westfield.ma.edu



-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of M K
Sent: Thursday, December 19, 2013 8:05 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] EIGRP Load Balance

HiI have two routers connected to each other via two serial connections I have two subnets on R1 : 192.168.0.0/24 and 192.168.1.0/24192.168.0.0/24 is used for Data and 192.168.1.0/24 is used for VoiceNow , I want to use the first connection for the Data traffic , and the other connection for Voice trafficAs well , I want to use the second link as backup for the first link if the Data traffic is down and vice versa for the voice trafficI am thinking of summerization on the second link , but my question should i implement one AS or more ? I do not want to use IP SLA and EEM , just EIGRP itself
Any ideas are appreciated?
BR, 		 	   		  
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/