[c-nsp] Port-channel strange issue ?
R S
dim0sal at hotmail.com
Mon Dec 23 03:06:24 EST 2013
Hi
I've a port-channel (no LACP) config in this way on my 6509:
*******************************************************************************
interface Port-channel11
description Te1/8,2/8
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1-3996,3999-4094
switchport mode trunk
logging event link-status
logging event trunk-status
load-interval 30
end
*******************************************************************************
I see the "Age of the port in the current state" of the second ten-giga link that seems up by few minutes...
*******************************************************************************
#sh etherchannel 11 detail
Group state = L2
Ports: 2 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol: -
Minimum Links: 0
Ports in the group:
-------------------
Port: Te1/8
------------
Port state = Up Mstr In-Bndl
Channel group = 11 Mode = On Gcchange = -
Port-channel = Po11 GC = - Pseudo port-channel = Po11
Port index = 1 Load = 0x55 Protocol = -
Age of the port in the current state: 202d:00h:21m:34s
Port: Te2/8
------------
Port state = Up Mstr In-Bndl
Channel group = 11 Mode = On Gcchange = -
Port-channel = Po11 GC = - Pseudo port-channel = Po11
Port index = 0 Load = 0xAA Protocol = -
Age of the port in the current state: 0d:00h:03m:50s
Port-channels in the group:
----------------------
Port-channel: Po11
------------
Age of the Port-channel = 763d:05h:37m:56s
Logical slot/port = 14/3 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = -
Fast-switchover = disabled
Load share deferral = disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------------+------------------+-----------
1 55 Te1/8 On 4
0 AA Te2/8 On 4
Time since last port bundled: 561d:05h:17m:53s Te1/8
Time since last port Un-bundled: 561d:05h:33m:21s Te1/8
Last applied Hash Distribution Algorithm: Fixed
*******************************************************************************
The problem is that it doesn't refresh that timer...
If I repeat the command after seconds, minutes, or days it remains the same, the only counter incrementing is for the bundle...
Any idea why ?
could it be a problem ?
I sometimes experience L2 issues...
On the opposite site of the port-channel the counter is about hundreds of days...
Tks
*******************************************************************************
#sh etherchannel 11 detail
Group state = L2
Ports: 2 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol: -
Minimum Links: 0
Ports in the group:
-------------------
Port: Te1/8
------------
Port state = Up Mstr In-Bndl
Channel group = 11 Mode = On Gcchange = -
Port-channel = Po11 GC = - Pseudo port-channel = Po11
Port index = 1 Load = 0x55 Protocol = -
Age of the port in the current state: 202d:00h:21m:34s
Port: Te2/8
------------
Port state = Up Mstr In-Bndl
Channel group = 11 Mode = On Gcchange = -
Port-channel = Po11 GC = - Pseudo port-channel = Po11
Port index = 0 Load = 0xAA Protocol = -
Age of the port in the current state: 0d:00h:03m:50s
Port-channels in the group:
----------------------
Port-channel: Po11
------------
Age of the Port-channel = 763d:05h:38m:17s
Logical slot/port = 14/3 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = -
Fast-switchover = disabled
Load share deferral = disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------------+------------------+-----------
1 55 Te1/8 On 4
0 AA Te2/8 On 4
Time since last port bundled: 561d:05h:18m:13s Te1/8
Time since last port Un-bundled: 561d:05h:33m:41s Te1/8
Last applied Hash Distribution Algorithm: Fixed
More information about the cisco-nsp
mailing list