[c-nsp] MPLS L3VPN Inter-AS Option A

[Jason Lixfeld]

That will only hide the hops, not the labels with the hops otherwise present.   I believe label display is dependent on the traceroute implementation.

--

Sent from my mobile device


On 2013-02-02, at 9:56 AM, "Rati , Berikaant Jokhadze" <iinfo83 at gmail.com> wrote:

> It's appear by default , you should need to enter "no ip mpls propagate-ttl forward"
> 
> On 02/02/2013 06:42 PM, M K wrote:
>> Hi allI was simulating the above , and end to end connectivity between customers sites is achieved My concern is when i trace from a customer site to the other there should not be labels appear , am i right ?
>> Thanks                       
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/