[c-nsp] sup720 ICMP redirects "once per second"

[Tassos Chatzithomaoglou]

"show standby redirect" should provide some info.
Since these redirects are controlled by HSRP (which changes the internal IPs), maybe there is no way to change their
interval.
There is a command to disable them though.

--
Tassos

Phil Mayers wrote on 11/02/2013 16:17:
> All,
>
> Does anyone know which knob controls the "only send 1 ICMP redirect / sec" on an HSRP-enabled SVI on 6500/sup720 (SXJ
> IOS)? Is there a "show" command for the defaults / current setting?
>
> Note: I am not talking about the redirect MLS rate-limiter here; that's disabled. I'm seeing constant traffic flowing
> and would expect constant ICMP redirects, but that's not happening - they're coming at regular 1-second intervals,
> regardless of the underlying packet arrival rate.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>