[c-nsp] Arrows in the output of "show tcam interface" on 7600

[Tóth András]

As far as I remember when the hitcount for the particular VMR is not 0, it
will get an arrow.

Andras



On Wed, Feb 13, 2013 at 6:29 AM, John Neiberger <jneiberger at gmail.com>wrote:

> I was looking through the output of "show tcam interface <interface> acl
> out ip detail" and I'm wondering what arrows at the end of the lines mean.
> Most lines don't have them, but occasional entries do have them.
>
>  V 10172         0.0.0.0         0.0.0.0       P=0             P=0
> ------   0 ---- 0 192 -- C-- 0-0  <-
>  M 10178         0.0.0.0         0.0.0.0         0               0
> ------   0 ---- 0 252             <-
>  R rslt: PERMIT_RESULT (*)             rtr_rslt: PERMIT_RESULT
> (*)                   hit_cnt=4521  <-
>
>  V 10173         0.0.0.0         0.0.0.0       P=0             P=0
> ------   0 ---- 0 136 -- C-- 0-0
>  M 10178         0.0.0.0         0.0.0.0         0               0
> ------   0 ---- 0 252
>  R rslt: PERMIT_RESULT (*)             rtr_rslt: PERMIT_RESULT
> (*)                   hit_cnt=0
>
> Any idea what those indicate?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>