[c-nsp] BGP4 MIB support on IOS 12.4

[HahnC at t-systems.com]

Thanks Nick, I will check this out. But since it's old hardware I don't expect 15.x support for it.

Anyway, thanks again,
Christian

>-----Ursprüngliche Nachricht-----
>Von: Nick Hilliard [mailto:nick at foobar.org]
>Gesendet: Montag, 18. Februar 2013 22:50
>An: Hahn, Christian
>Cc: cisco-nsp at puck.nether.net
>Betreff: Re: [c-nsp] BGP4 MIB support on IOS 12.4
>
>On 18/02/2013 10:16, HahnC at t-systems.com wrote:
>> I have an old Cisco which I plan to use as internal BGP route
>> collector using IOS 12.4(23b) Enterprise Plus. Cisco MIB site claims
>> that the image supports Cisco Enterprise BGP4 MIB, but an snmpwalk for
>> 1.3.6.1.4.1.9.9.187 returns nothing (yes, a "show bgp ipv6 unicast"
>> returns something ;-). So I'm not sure how reliable the information on
>> the Cisco MIB site is.
>
>> Anyone out there has a recommendation for a 12.4. image which supports
>> this MIB?
>
>It's not supported on 12.4 - you'll need to move to vanilla IOS 15.2(4)S
>/ 15.2(3)T (or IOS XR 3.4.0 if you're on an XR platform):
>
>> router bgp xxx
>>  neighbor 2001::1 remote-as 64512
>>  address-family ipv6
>>   neighbor 2001::1 activate
>
>leads to:
>
>> % snmpwalk -v 2c -c public 192.168.3.1 .1.3.6.1.4.1.9.9.187.1.2.7
>> SNMPv2-
>SMI::enterprises.9.9.187.1.2.7.1.3.20.16.32.1.0.0.0.0.0.0.0.0.0.0.0.0.0.
>1.2.1 = STRING: "IPv6 Unicast"
>
>w000t, finally!
>
>Nick