[c-nsp] IPSEC Tunnel between ASA and IOS (with redundant link)

[Adam Greene]

DS,

On the ASA it's pretty much as simple as adding a secondary peer in the
crypto map, and duplicating the tunnel-group configurations for the second
peer.

On the 2811, the establishment of the secondary tunnel will depend on the
existence of a route in the routing table over the secondary link. 

Thanks,
Adam

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Bunny Singh
Sent: Wednesday, February 20, 2013 1:58 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] IPSEC Tunnel between ASA and IOS (with redundant link)

HI, 

i have a cisco asa 5520 at site A and cisco 2811 at site B with two P2P
links (Redundant) Link, Now i want to know the configuration to built a
redundant ipsec tunnel. I have read couple of article, but didn't got the
success.

Ospf routing is running between these devices.


Regards
DS
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/