[c-nsp] bgp aggregate address

[Aaron]

No.  loopback connected network showed up in rib but not in bgp table.

-----Original Message-----
From: Adam Vitkovsky [mailto:adam.vitkovsky at swan.sk] 
Sent: Thursday, February 28, 2013 7:29 AM
To: 'Aaron'; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] bgp aggregate address

Did you get the prefix of the locally configured loopback into bgp table
please?

adam
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aaron
Sent: Thursday, February 28, 2013 2:14 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] bgp aggregate address

 

vrf oneone

rd 10.0.0.55:11

address-family ipv4 unicast

  aggregate-address 12.12.12.0/24 summary-only

 

it seems that if I have a loopback interface with ipv4 addr 12.12.12.1
255.255.255.0 that it will not kickoff that bgp aggregate advertisement,
BUT, if I delete the loopback interface and from another router elsewhere,
inject via igp (ospf) that route for 12.12.12.0/24 then bgp will aggregate
and send out the aggregate address summary.

 

Is it true that a member subnet of an aggregate address LOCALLY configured
on a loopback WILL NOT be enough to cause bgp aggregate address to kick in ?

 

Aaron

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/