[c-nsp] HSRP/VRRP/GLBP Dual Stack on Cat6500/Sup720 3BXL?

[Vinny_Abello at Dell.com]

Well, in SXI4a, GLBP complains if I try and configure IPv6 in the same GLBP group number:

"IPv4 address already configured"

I'm not clear if I'm supposed to use a different group number or if it's just not supported. All the configuration examples I found show *just* IPv6, not a dual stack example which is what triggered my inquiry.

-Vinny

-----Original Message-----
From: Jon Lewis [mailto:jlewis at lewis.org] 
Sent: Thursday, February 28, 2013 1:19 PM
To: Abello, Vinny
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] HSRP/VRRP/GLBP Dual Stack on Cat6500/Sup720 3BXL?

On Thu, 28 Feb 2013 Vinny_Abello at Dell.com wrote:

> Hello,
>
> Is there dual stack support in any redundancy protocol (HSRP/VRRP/GLBP) 
> on the Catalyst 6500 with a Sup720 3BXL? If so, which protocols are 
> supported and beginning in what IOS releases?

I haven't utilized it in v6, but SXI appears to have v6 capable HSRP and 
GLBP.  VRRP doesn't appear to have any v6 support.

----------------------------------------------------------------------
  Jon Lewis, MCP :)           |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________