[c-nsp] 6509 with SUP720-3BXL and WS-X6704-10GE with DFC3BXL

[Lee Starnes]

Thanks Jeff.

-Lee

On Fri, Jan 4, 2013 at 3:49 PM, Jeff Kell <jeff-kell at utc.edu> wrote:

> If all the cards in the chassis are DFC3BXL compatible, it should.
>
> I just added a 6716-10GE with DFC3C to a chassis that had some CFC-only
> SFP gig blades in it (6724/6748 I think).  It works, but not in DFC3C
> mode, and leaves a slurry of warnings at startup.
>
> Jeff
>
> On 1/4/2013 6:39 PM, Lee Starnes wrote:
> > Hello,
> >
> > After wading through hours of pages on Cisco's site I was not able to
> > determine if the following configuration will work without having to
> > upgrade either the DFC or the IOS. We have some switches that I need to
> > install some 10G ports in. I have some WS-X6704-10GE blades with 3BXL DFC
> > boards on them. I don't have a chassis to test with, and don't want to
> ship
> > these out to have them installed if they are not going to work. The
> chassis
> > have SUP720-3BXL's in them and are running
> > s72033-advipservicesk9_wan-mz.122-33.SXH. Aside from the fact that the
> IOS
> > is older, does anyone see any issues with this IOS and SUP working with
> the
> > WS-X6704-10GE?
> >
> > Thanks,
> >
> > Lee
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>
>