[c-nsp] show command for active multicast kbps rate

[Erçin TORUN]

Hi Adam,

Thanks for quick response. I used the "sh mrib route" before but without
"rate-per-route" config, will check asap.

2013/1/8 Adam Vitkovsky <adam.vitkovsky at swan.sk>

> In XR its sh mrib route/sh mfib route but in order to get the bw rate you
> have to have the following cmd enabled:
>
> multicast-routing
>  rate-per-route
>
> adam
>
>


-- 
ERCIN TORUN