[c-nsp] L2 car/policing on C3560X (IOS 15.0(1)SE3, ip services licence)

[Tóth András]

Append the "statistics" keyword to the "show mls qos int g0/4" command to
see more details. "show mls qos int g0/4 statistics".

Andras



On Tue, Jan 15, 2013 at 3:37 PM, Victor Sudakov <vas at mpeks.tomsk.su> wrote:

>
> Terry Cheema wrote:
> > Yes, you should be able to do that, but on 3560/3750 I think there's
> > a limitation, it's not going to show the output of show policy-map
> > interface correctly. You can use show mls qos int g0/4 instead - it
> > should give you a view of whats going on...
> >
> > Another thing, By default qos is disabled on 3560, so no
> > classification occurs, make sure to add "mls qos" to enable, just in
> > case you havent done that...
>
> Thanks a lot, "mls qos" did the job, at least policing works.
> "show mls qos int g0/4" shows that there is a policy map, but it is
> not as informative as "show policy-map interface" would be.
>
> Could you advice a good white paper on QoS on L3 switches?
>
> --
> Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> sip:sudakov at sibptus.tomsk.ru
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>