[c-nsp] Cisco C887VA PPPoE could cannot connect to LNS

[Dol Meun]

Dear All,

I have installed LNS with local authentication with the configuration
below, I have two cisco router one is Cisco 1811 and I am using port fa0
connected to LNS fast0 then the PPPoE session is working fine. But for
Cisco C887VA, I am using port Fast 0 on C887 connected to port Fast 1 on
LNS but PPPoE is not working. is there any miss configure in my
configuration or is there any restrict on Cisco C887 port for PPPoE
connection. Note: on Cisco 1811 I use layer 3 port and Router Cisco 887 I
use switchport as shown in the configuration. Is there anyone used to met
this problem?

*##LNS (LAC and LNS in the same router)*
aaa new-model
!
!
aaa authentication login default local
aaa authentication ppp default local
!
!
aaa session-id common
!
!
dot11 syslog
ip source-route
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
vpdn enable
vpdn multihop
vpdn aaa attribute nas-port vpdn-nas
vpdn redirect
vpdn logging
vpdn logging local
vpdn logging user
vpdn logging tunnel-drop
vpdn history failure table-size 50
vpdn session-limit 1400
vpdn search-order multihop-hostname domain dnis
vpdn domain-delimiter @ suffix
vpdn domain-delimiter / prefix
!
vpdn-group LAC
!
vpdn-group LAC-TEST
 request-dialin
  protocol l2tp
  domain eintellego.net
  domain direct.telstra.net
 initiate-to ip 192.168.55.2
 source-ip 192.168.55.1
 local name LAC
 l2tp tunnel password 0 saba
!
!
!
username cisco password 0 cisco

interface FastEthernet0
 description "Link to PPPoE Client"
 no ip address
 duplex auto
 speed auto
 pppoe enable group LAC-TEST
!
interface FastEthernet1
 description Lik to MB
 no ip address
 duplex auto
 speed 100
 pppoe enable group LAC-TEST

*##Cisco 1811 (MPC8500) This client is PPPoE can connect PPPoE and it is
working fine.*

interface FastEthernet0
 description "Link to PPPoE Client'
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip virtual-reassembly
 ip tcp adjust-mss 1452
 duplex auto
 speed auto
 pppoe enable group global
 pppoe-client dial-pool-number 1
!
interface Dialer1
 ip address negotiated
 encapsulation ppp
 dialer pool 1
 no cdp enable
 ppp authentication pap chap callin
 ppp chap hostname cisco
 ppp chap password 0 ciscopass
 ppp pap sent-username cisco password 0 ciscopass

*##Cisco C887VA-W-A-K9( is the router that has problem with PPPoE connected
to LNS)*

interface FastEthernet0
 switchport access vlan 20
 no ip address
 pppoe-client dial-pool-number 1
!
!
interface Dialer1
 description "Link to DSL CPE"
 ip address negotiated
 ip mtu 1452
 ip nat outside
 ip virtual-reassembly in
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap pap callin
 ppp chap hostname client1
 ppp chap password 0 425198
 ppp pap sent-username client1 password 0 425198
 no cdp enable

Thanks in advance.
Dol

**

*Dol Meun, Network Operations - Level 1 - eintellego Pty Ltd*

dol at eintellego.asia ; www.eintellego.asia

Cell +855 (0)15256904 ; skype://dolmeun

www.linkedin.com/in/dolmeun
#54, st. 350, Sangkat Boeung Keng Kang 3,
Chamkarmorn,Phnom Penh, Cambodia PO Box 710, Phnom Penh Cambodia


--

The Experts Who The Experts Call

Juniper - Cisco – Brocade - IBM