[c-nsp] mpls ip creating traffic disturbance(s)

[Eric A Louie]

I had two interfaces configured for vrf.  No vrf lite configured.

I used vpnv4 on the MP-BGP configuration, pointing to respective loopback 
interfaces.

 Much appreciated, Eric




________________________________
From: Pete Lumbis <alumbis at gmail.com>
To: Eric A Louie <elouie at yahoo.com>
Cc: Cisco NSP <cisco-nsp at puck.nether.net>
Sent: Tue, January 15, 2013 7:12:22 PM
Subject: Re: [c-nsp] mpls ip creating traffic disturbance(s)


Did you only configure "mpls ip"? Do you have vpnv4 peers configured anywhere? 
Are you doing VRF lite on this router?



On Tue, Jan 15, 2013 at 7:18 PM, Eric A Louie <elouie at yahoo.com> wrote:

We implemented what seemed to be a pretty simple mpls configuration to test a
>vrf config.
>
>It caused widespread havoc across my production network.
>
>Has anyone encountered a situation where they've put "mpls ip" on a link and 
had
>it cause problems with web browsing to the Internet, even on traffic that 
passed
>through the router that was not going through the mpls ip interfaces?
>
>I have a case open with Cisco TAC but was looking for some additional guidance
>and perhaps some experience around this strange problem.
>
> Much appreciated, Eric
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>