[c-nsp] CRS-8-DC-KIT-M

[Antonio Soares]

Thanks. It seems there’s something. I was searching for the KIT PN but no
luck


 

 

Regards,

 

Antonio Soares, CCIE #18473 (R&S/SP)
 <mailto:amsoares at netcabo.pt> amsoares at netcabo.pt

 <http://www.ccie18473.net/> http://www.ccie18473.net

 

 

From: gawul00 at gmail.com [mailto:gawul00 at gmail.com] On Behalf Of Andrew Koch
Sent: terça-feira, 22 de Janeiro de 2013 19:01
To: Antonio Soares
Cc: cisco-nsp
Subject: Re: [c-nsp] CRS-8-DC-KIT-M

 

On Tue, Jan 22, 2013 at 12:21 PM, Antonio Soares <amsoares at netcabo.pt>
wrote:

Hello group,

I need to install the CRS-8-DC-KIT-M on a few CRS-8. Basically this means
the change from the Fixed Configuration Power System to the Modular Power
System. I'm not able to find anywhere the kit installation guide. I wonder
if it really exists. I have queried the local SE and he was not able to help
me. Anyone has experience with this ?

Here I have the description of each Power System:

http://www.cisco.com/en/US/docs/routers/crs/crs1/8_slot/system/description/h
<http://www.cisco.com/en/US/docs/routers/crs/crs1/8_slot/system/description/
h%0d%0aq6345_2.html> 
q6345_2.html

But no details about moving from one to the other.


The install guide has good information on removal and installation of both
power systems:
http://www.cisco.com/en/US/docs/routers/crs/crs1/8_slot/installation/guide/h
qlcch2.html#wp1193161

Andy