[c-nsp] AS5400 supported PPPOE sessions
john travolta
johnbesha at yahoo.com
Fri Jan 25 14:13:22 EST 2013
Hi,
I have an AS5400 router, I want to used to terminate PPPOE sessions, I was wondering how many PPPOE sessions can this router support? below is the sho ver output;
ER-BRAS3#sho version
Cisco IOS Software, 5400 Software (C5400-IS-M), Version 12.4(11)T4, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 26-Oct-07 23:35 by prod_rel_team
ROM: System Bootstrap, Version 12.3(12r)PI6b, RELEASE SOFTWARE (fc1)
ER-BRAS3 uptime is 1 hour, 19 minutes
System returned to ROM by power-on
System image file is "flash:c5400-is-mz.124-11.T4.bin"
Cisco AS5400XM (BCM) processor (revision 0x22) with 393215K/131072K bytes of memory.
Processor board ID JAE1139XVP8
SB-1 CPU at 750MHz, Implementation 1025, Rev 0.3, 256KB L2 Cache
Last reset from power-on
Manufacture Cookie Info:
EEPROM Version 0x4, Board ID 0x4BD,
Board Hardware Version 2.7, Item Number 800-6572547-03,
Board Revision A0, Serial Number JAE1139XVP8.
Processor 0x0, MAC Address 001b.d51b.5310
2 Gigabit Ethernet interfaces
6 Serial interfaces
4 Channelized E1/PRI ports
512K bytes of NVRAM.
125440K bytes of ATA External CompactFlash (Read/Write)
Regards,
Karwan
More information about the cisco-nsp
mailing list