[c-nsp] IOSXR 4.2.3

[Tassos Chatzithomaoglou]

We have been using it for some time on ASR9k & CRS (mainly OSPF, BGP, (EoM|M|V)PLS, IPv6,
LAG) without any major issues until now.
Although there is preliminary support for ISSU SMUs, we aren't thinking to risk it. So we
plan on staying on this version until ISSU become mature in 4.3.x.

--
Tassos

Jason Lixfeld wrote on 27/1/2013 03:23:
> No new problems that I have observed, although having to repartition the flash drives on the RSPs in order to install is certainly annoying.
>
> Also, the lack of ISSU - still - makes these boxes impossible to deploy as customer termination devices.  The plethora of mandatory reboot SMUs that come up for this platform, no matter what version, is horrendous.  Also, any time you attempt to open an SR, XR TACs first response is "install all mandatory SMUs first".
>
> --
>
> Sent from my mobile device
>
>
> On 2013-01-26, at 7:57 PM, judy teng <juxiangt at yahoo.com> wrote:
>
>> Does somebody use code IOSXR 4.2.3? Any comment? 
>>
>> Thanks,
>>
>> JT
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>