[c-nsp] IOSXR 4.2.3

[McEvilly, Patrick]

Only issue we ran into was bug CSCuc15603.  Using

show bgp ipv4 uni" with the "advertised" keyword

causes a memory leak in BGP process.  It will work for a while but then
run out of available memory to execute the command successfully.  I
guess it will eventually cause BGP process to restart (we never got
there).  SMU fix promised in Jan/Feb time frame.

Patrick

On 1/26/13 8:23 PM, Jason Lixfeld wrote:
> No new problems that I have observed, although having to repartition the flash drives on the RSPs in order to install is certainly annoying.
> 
> Also, the lack of ISSU - still - makes these boxes impossible to deploy as customer termination devices.  The plethora of mandatory reboot SMUs that come up for this platform, no matter what version, is horrendous.  Also, any time you attempt to open an SR, XR TACs first response is "install all mandatory SMUs first".
> 
> --
> 
> Sent from my mobile device
> 
> 
> On 2013-01-26, at 7:57 PM, judy teng <juxiangt at yahoo.com> wrote:
> 
>> Does somebody use code IOSXR 4.2.3? Any comment? 
>>
>> Thanks,
>>
>> JT
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>