[c-nsp] 6500 NSF/SSO uplink redendancy

[Ben Hammadi, Kayssar (NSN - TN/Tunis)]

Thanks for the answer , 

  There will be any oversubscription in between ? 

Kayssar


-----Original Message-----
From: ext Chuck Church [mailto:chuckchurch at gmail.com] 
Sent: Monday, January 28, 2013 3:36 PM
To: Ben Hammadi, Kayssar (NSN - TN/Tunis); cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6500 NSF/SSO uplink redendancy

Unless something has changed with the Sup2T (I doubt it has), in SSO
mode,
the 6500 will allow the ports on the standby sup to be used at all
times.
In other words, if your active sup is in slot 5 and standby is in slot
6,
you will have both the 2 or 3 ports of each supervisor in the config and
working.

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ben Hammadi,
Kayssar
(NSN - TN/Tunis)
Sent: Monday, January 28, 2013 2:39 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6500 NSF/SSO uplink redendancy

Dears 

      I read somewhere that Interfaces in  the Redundant Supervisor will
use
same Mac and IP of the corresponding interface in the Active Supervisor
.
in the other hand  Interfaces in  the Redundant Supervisor use different
port number , is there any manual config needed in case the active fail
or
uplinks  config will be copied automatically on the Redundant Supervisor
interfaces

Br.


BEN HAMMADI Kayssar
 
NOKIA SIEMENS NETWORKS
Lead Engineer -BroadBand Connectivity
JNCIE (#471), CCIP 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/