[c-nsp] 6500 NSF/SSO uplink redendancy

[Chuck Church]

Yes.

Chuck

-----Original Message-----
From: Ben Hammadi, Kayssar (NSN - TN/Tunis)
[mailto:kayssar.ben_hammadi at nsn.com] 
Sent: Monday, January 28, 2013 6:54 AM
To: ext Chuck Church; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6500 NSF/SSO uplink redendancy

Can we make a port-chanel with two members, one from the firs Sup and the
second from the other  to  avoid allocation of two IP @ 

Kayssar


-----Original Message-----
From: ext Chuck Church [mailto:chuckchurch at gmail.com]
Sent: Monday, January 28, 2013 3:43 PM
To: Ben Hammadi, Kayssar (NSN - TN/Tunis); cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6500 NSF/SSO uplink redendancy

No.  Other line cards do, but the Sup ports (whether gig or 10GE) are line
rate.  The 4500s DO have some redundant interface and bandwidth limitations,
but not the 6500s.

Chuck


-----Original Message-----
From: Ben Hammadi, Kayssar (NSN - TN/Tunis)
[mailto:kayssar.ben_hammadi at nsn.com]
Sent: Monday, January 28, 2013 6:39 AM
To: ext Chuck Church; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6500 NSF/SSO uplink redendancy

Thanks for the answer , 

  There will be any oversubscription in between ? 

Kayssar


-----Original Message-----
From: ext Chuck Church [mailto:chuckchurch at gmail.com]
Sent: Monday, January 28, 2013 3:36 PM
To: Ben Hammadi, Kayssar (NSN - TN/Tunis); cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 6500 NSF/SSO uplink redendancy

Unless something has changed with the Sup2T (I doubt it has), in SSO mode,
the 6500 will allow the ports on the standby sup to be used at all times.
In other words, if your active sup is in slot 5 and standby is in slot 6,
you will have both the 2 or 3 ports of each supervisor in the config and
working.

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ben Hammadi, Kayssar
(NSN - TN/Tunis)
Sent: Monday, January 28, 2013 2:39 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6500 NSF/SSO uplink redendancy

Dears 

      I read somewhere that Interfaces in  the Redundant Supervisor will use
same Mac and IP of the corresponding interface in the Active Supervisor .
in the other hand  Interfaces in  the Redundant Supervisor use different
port number , is there any manual config needed in case the active fail or
uplinks  config will be copied automatically on the Redundant Supervisor
interfaces

Br.


BEN HAMMADI Kayssar
 
NOKIA SIEMENS NETWORKS
Lead Engineer -BroadBand Connectivity
JNCIE (#471), CCIP 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/