[c-nsp] VTP Pruning and VTPv3

[Mohamed A. Monsef Abbas]

Actually there's nothing problem but what I highly recommend is
understanding why the VTP pruning invented for then go for it and check if
there's transparent SW's in the middle between the server & clients. then
enjoy your technology.

Thanks,

On Tue, Jan 29, 2013 at 8:57 AM, Victor Sudakov <vas at mpeks.tomsk.su> wrote:

> Colleagues,
>
> Are there any known problems with VTP pruning in a VTP version 3
> domain? Should I expect any problems if I enable it?
>
> I know about a caveat that "With VTP versions 1 and 2, when you enable
> pruning on the VTP server, it is enabled for the entire VTP domain. In
> VTP version 3, you must manually enable pruning on each switch in the
> domain." Any other issues?
>
> TIA for any input.
>
> --
> Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> sip:sudakov at sibptus.tomsk.ru
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
--
Do you Think we Can Fly ?
Well I Do.

Eng. Mohamed A. Monsef Abbas
Cisco Networks Engineer
CCIE® #37569 (R&S)
CCNP® - CCIP® - CCDP®
CS-RSSS® - IPv6-FGCE®
ITIL® - ISO/IEC 27002®
Cell Phone : +2 0109 255  6666
Land Line  : +2 02 24 66 2 33 8