[c-nsp] Card 12000-SIP-601 reboot

PlaWanSai RMUTT CPE IX pws_admin at thaicpe.com
Wed Jul 10 06:44:11 EDT 2013


Hi,
My customer found Card 12000-SIP-601 always reboot. He moved services to another card. But, The router has still this log occur always follow to this attach file. From message I think maybe cause from software force (software force crashes ,sig=23) so the time that line card is restarting, I seen process and CPU are normally all times.
I think the root cause from hardware. What do you think ? I can't open TAC.

Thank you very much

SOUTH_GW>sh ver
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(33)S6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Wed 16-Dec-09 13:27 by kellythw
 
ROM: System Bootstrap, Version 12.0(20040128:214555) [assafb-PRP1P_20040101 1.8dev(2.83)] DEVELOPMENT SOFTWARE
BOOTLDR: GS Software (C12KPRP-K4P-M), Version 12.0(33)S6, RELEASE SOFTWARE (fc1)
 
SOUTH_GW uptime is 19 weeks, 1 day, 23 hours, 51 minutes
Uptime for this control processor is 19 weeks, 1 day, 23 hours, 33 minutes
System returned to ROM by reload at 02:27:16 TST Thu Apr 22 2010
System restarted at 11:06:19 TST Fri Feb 22 2013
System image file is "disk0:c12kprp-k4p-mz.120-33.S6.bin"
 
cisco 12410/PRP (MPC7457) processor (revision 0x00) with 2097152K bytes of memory.
MPC7457 CPU at 1263Mhz, Rev 1.2, 512KB L2, 2048KB L3 Cache
Last reset from power-on
Channelized E1, Version 1.0.
 
2 Route Processor Cards
2 Clock Scheduler Cards
5 Switch Fabric Cards
4 T1/E1 BITS controllers
1 four-port OC3 POS controller (4 POS).
1 Four Port Gigabit Ethernet/IEEE 802.3z controller (4 GigabitEthernet).
3 ISE 10G SPA Interface Cards (12000-SIP-601)
1 ISE 2.5G SPA Interface Card (12000-SIP-401)
3 Ethernet/IEEE 802.3 interface(s)
14 GigabitEthernet/IEEE 802.3 interface(s)
2 10GigabitEthernet/IEEE 802.3 interface(s)
14 Serial network interface(s)
4 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.
 
1000944K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
!!!!!!!!!!!!!
SLOT 3:Jul  7 10:53:59.624 TST:  RX_XBMA: (36467) FCRAM SBE detected. info: 0x80017D06
SLOT 3:Jul  7 10:54:27.772 TST:  RX_XBMA: (33177) FCRAM SBE detected. info: 0x80828034
SLOT 3:Jul  7 10:54:56.064 TST:  RX_XBMA: (35146) FCRAM SBE detected. info: 0x8080A317
SLOT 3:Jul  7 10:55:24.192 TST:  RX_XBMA: (33092) FCRAM SBE detected. info: 0x8081E6E6
SLOT 3:Jul  7 10:55:52.407 TST:  RX_XBMA: (33429) FCRAM SBE detected. info: 0x80033214
SLOT 3:Jul  7 10:56:20.539 TST:  RX_XBMA: (34678) FCRAM SBE detected. info: 0x80813D24
SLOT 3:Jul  7 10:56:48.747 TST:  RX_XBMA: (34866) FCRAM SBE detected. info: 0x80423654
SLOT 3:Jul  7 10:57:16.995 TST:  RX_XBMA: (32788) FCRAM SBE detected. info: 0x80030E1A
SLOT 3:Jul  7 10:57:45.202 TST:  RX_XBMA: (32373) FCRAM SBE detected. info: 0x8000C5A6
SOUTH_GW>

<image001.png>
 





More information about the cisco-nsp mailing list