[c-nsp] Same static-route to different destination / Port-chanel

[Dikkema, Michael (Business Technology)]

For port channel load balancing you should look into your hashing method rather than routing.

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ahmed Hilmy
Sent: Wednesday, July 17, 2013 3:29 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Same static-route to different destination / Port-chanel

Hello Friends,


Can i configure a static route for prefix x.x.x.x/y to different destinations a.a.a.a & b.b.b.b ?

Router 1  -------- Router 2 directly connected.


I want to do this thing because i have port-chanel between R1 - R1 with two interfaces, one of them is carrying 990 Mb but 2nd one is only carrying 60 Mb.

Config is identical on bundle members.


Please advice.


Regards,

Ahmed
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/