[c-nsp] XR 12000 Turboboot issue
arulgobinath emmanuel
arulgobi at gmail.com
Thu Jun 6 12:24:45 EDT 2013
Hi All,
Anyone face this issue before . I've upgrade the OS to 3.6 to 3.9.2 through
turboboot then i've applied the FPD and upgraded the mbus , fabric
downloader ,rom .
Then went to turboboot from 3.9.2 to 4.2.4 then hitting following error and
router struck in XR PREP.
Jun 06 14:21:03.496 : TURBOBOOT: Formatting disk0:
Jun 06 14:21:04.010 : TURBOBOOT: Failed to format the device 'disk0:'
Jun 06 14:21:04.268 : TURBOBOOT: Resetting TURBOBOOT rommon variable to
(TURBOBOOT=).
Jun 06 14:21:04.588 : TURBOBOOT: Setting config-register to NOT autoboot
the router and NOT disable send break.
RP/0/9/CPU0:Jun 6 14:21:11.625 : placed[342]: Got node role 4 :1 0 1
Jun 06 14:21:27.509 : TURBOBOOT: Turboboot failed: the system may be in an
inconsistent state, and the router will not be rebooted.
if i try to configure the session following error pops up
RP/0/9/CPU0:Jun 6 14:31:18.544 : config[65755]:
%MGBL-CONFIGCLI-3-TARGET_CFG_CREATE : main:Failed to create target
config:'CfgMgr' detected the 'warning' condition 'Operation not permitted
while software installation is in progress.'.
But show install request doesn't show any installation progress :
RP/0/9/CPU0:ios#show install request
Thu Jun 6 14:32.955 UTC
[KThere are no install requests in operation.
Any one faces such issues previously ?
thanks in advance ,
Gobinath
More information about the cisco-nsp
mailing list