[c-nsp] 7204VXR reboots
Frank Bulk
frnkblk at iname.com
Sun Jun 9 12:45:57 EDT 2013
I don't believe there is a version of 12.2SR for the 7200's that supports
both DHCPv6-PD static route insertion AND IPv6 PBR.
Frank
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mark
Tinka
Sent: Saturday, June 08, 2013 5:27 AM
To: Gert Doering
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7204VXR reboots
On Friday, June 07, 2013 10:30:38 PM Gert Doering wrote:
> Yeah, true. But my experience with 12.2SR on 7200s has
> not been very good overall,...
What kinds of problems did you have?
I've been running it since 2010 (which was the only/best way
to harmonize code between the NPE-G2/7201 and other NPE's
for the 7200 platform), and apart from various bugs that
were very prevalent in SRC, it's been rock solid for me.
I never did run SRD - when it made sense to upgrade, I went
from SRC to SRE, as SRE introduced 32-bit ASN support on the
platform.
> and given that there is
> 15.0M, I have always questioned what use it is to have
> support for *one* software platform in a special-case
> IOS train, maintained by the BU inside Cisco that caused
> the most annoyance of all of them (having a polite day
> today).
12.2SR is also coded for the 7600. So it's the 7200 and 7600
that this code is maintained for.
Mark.
More information about the cisco-nsp
mailing list