[c-nsp] Linecard GSR12000 reboot

[PlaWanSai RMUTT CPE IX]

Dear All ,
          We're using GSR12000. We've got linecard reboot for 2 day in same
time.
We have attached some logging information below. Please help to check if you
can give any advice will be appreciated.
If you need more information please let me know. 

------------------------------------------------------------------------
NAME: "Chassis", DESCR: "12416/PRP chassis, Hw Revision: 0x00"
NAME: "slot 14", DESCR: "ISE 10G Modular Services Card v2"
PID: 12000-SIP-601     , VID: V07
------------------------------------------------------------------------

SLOT 14:Jun 11 12:58:04 THA: %FIA-3-FIFOERRS: To Fabric FIFO Error was
detected.
Cell FIFO Overflow, Data = 0x400, 0x8000, 0x0, 0x0.
Jun 11 12:58:07 THA: %FABRIC-3-ERR_HANDLE: Due to FIA HALT error,
reconfigure FIA on slot 14 SLOT 14:Jun 11 12:58:06 THA: %FIA-3-HALT: To
Fabric Jun 11 12:58:09 THA: %FABRIC-3-ERR_HANDLE: Due to FIA HALT error,
reconfigure FIA on slot 14 SLOT 14:Jun 11 12:58:07 THA:
%EE48-3-QM_SANITY_WARNING: Few free buffers(0) are available in ToFab FreeQ
pool# 1 SLOT 14:Jun 11 12:58:08 THA: %FIA-3-HALT: To Fabric Jun 11 12:58:11
THA: %FABRIC-3-ERR_HANDLE: Due to FIA HALT error, reconfigure FIA on slot 14
Jun 11 12:58:11 THA: %FABRIC-3-ERR_HANDLE: Due to FIA HALT error, restart LC
on slot 14 Jun 11 12:58:11 THA: %LINK-5-CHANGED: Interface
GigabitEthernet14/0/0, changed state to administratively down Jun 11
12:58:11 THA: %LCINFO-3-CRASH: Line card in slot 14 crashed Jun 11 12:58:11
THA: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet14/0/0,
changed state to down SLOT 14:Jun 11 12:58:10 THA: %FIA-3-HALT: To Fabric
SLOT 14:Jun 11 12:58:10 THA: %FIA-3-FIFOERRS: To Fabric FIFO Error was
detected.
Cell FIFO Overflow, Data = 0x400, 0x8000, 0x0, 0x0.
Jun 11 12:58:12 THA: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline
in subslot 14/0 Jun 11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor
2001:C38:5000:607::4618:1 Down Interface flap Jun 11 12:58:12 THA:
%BGP-5-ADJCHANGE: neighbor 2001:C38:5000:609::4621:3 Down Interface flap Jun
11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor 61.19.10.10 Down Interface flap
Jun 11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor 61.19.10.38 Down Interface
flap Jun 11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor 61.19.10.74 Down
Interface flap Jun 11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor 61.19.10.78
Down Interface flap Jun 11 12:58:12 THA: %BGP-5-ADJCHANGE: neighbor
61.19.10.86 Down Interface flap Jun 11 12:58:14 THA: %LINK-3-UPDOWN:
Interface GigabitEthernet14/0/0, changed state to down Jun 11 12:58:14 THA:
%FABRIC-3-ERR_HANDLE: Due to FIA HALT error, reconfigure FIA on slot 14
00:00:00: %MBUS_SYS-3-REASSEMBLY: Error slot 0, stream 4 first packet lost
SLOT 14:00:01:39: %SYS-5-RESTART: System restarted -- Cisco Internetwork
Operating System Software IOS (tm) GS Software (GLC1-LC-M), Version
12.0(33)S7, RELEASE SOFTWARE (fc1) Technical Support:
http://www.cisco.com/techsupport Copyright (c) 1986-2010 by cisco Systems,
Inc.
Compiled Mon 28-Jun-10 07:21 by debajpal SLOT 14:00:01:39:  Setting LEDs
SLOT 14:Jun 11 13:00:07 THA: %LC-3-LAST_CRASH: LAST Shutdown Info: Reload
from RP - interrupt:
To Fabric
To Fabric FIFO Error was detected.
Cell FIFO Overflow, Data = 0x400, 0x8000, 0x0, 0x0.
To Fabric
To Fabric FIFO Error was detected.
Cell FIFO Overflow, Data = 0x400, 0x8000, 0x0, 0x0.
To Fabric
To Fabric FIFO Error was detected.
Cell FIFO Overflow, Data = 0x400, 0x8000, 0x0, 0x0.
Jun 11 13:00:10 THA: %EERP-5-MQC_POLICE_RATE_L:

Thank you very much.