[c-nsp] xconnect

[Mohammad Khalil]

Hi , thanks for the reply
Finally I could solve it by configuring send-label on R3 and R4 under the address-family ipv4 under the bgp router process

Thanks again

BR,
Mohammad


> From: adam.vitkovsky at swan.sk
> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] xconnect
> Date: Mon, 17 Jun 2013 11:11:43 +0200
> 
> Hi Mohammad,
> Just curious, have you used ospf or isis between the autonomous systems or
> do you run RFC3107 in between please? 
> 
> I'd start by verifying the label-switched path between R2 and R5 (sh mpls
> forwarding) -do you see your PW in there and is the bytes label switched
> increasing for the PW?
> Does the mpls ping works between R2 and R5 please?
> 
> adam
> 
>